How To Make Pig Feed Pellets With Feed Pellet Mill
The feed pellet mill is an essential equipment to make pig feed pellets. Zhengzhou Fusmar Machinery is a professional feed pellet production line supplier, this article will introduce the pig feed pellets processing technology in detail.
Raw Materials Preparation Stage
1. Pig feed pellets generally composed of energy feed, protein feed, mineral feed, and vitamin feed. When using feed, use as many types as possible to improve feed utilization efficiency.
2. The feed volume per kg of feed energy concentration should appropriate if it was too high, pigs eat will cause waste, or even not satiety. If it was too low, feed volume will too large, the pig can not eat so much, energy and nutrients can not meet.
3. Control of crude fiber content, feed palatability must good. Easy to digest crude fiber is an important factor affecting palatability, digestion, absorption, and feed conversion, the general crude fiber content does not exceed 6% to 8%.
4. Use local pig feed as much as possible to reduce costs. If the conditions permit, you can use a feed pellet mill to make pig feed pellets by yourself.
5. Appropriate addition of trace elements, vitamins, and antibacterial growth agents.
Feed Pellet Mill Processing Technology
Pigs prefer to eat sweet food, generally, many animals prefer sweets. Therefore, when formulating the feed formula, the ratio of corn to soybean meal can increase. After the feed formula customized, a good processing method needed to support, because a set of feed pellet production line units can directly affect the quality of the feed.
Remove The Impurity Process
In a set of pig feed pellet production line equipment, the process of removing impurities is indispensable. Especially have a lot of materials. The cleaning of sundries generally has special decontamination equipment. The important thing to talk about here is the removal of metal materials. If the metal substance accidentally mixed into the material, it will directly affect the use of the feed processing equipment. Generally, the use of a large number of permanent magnet cylinders for metal removal. Such as the "effect" of the magnetic field, achieves the purpose of material removal.
The Pulverization Cutting Process.
In a set of pig feed pellet production line, the crushing process is for better pelletization. If the material itself is a powder, you can skip this step. Generally, the length after pulverization by the crushing system of the feed crusher is 6 mm or less. The common crushing machine is the feed hammer mill.
Mixing And Stirring Process
After the pulverization process of the pig feed pellet plant, the material conveyed to the mixing and agitation process. In general, a feed formulation consists of...
Do you already have an account? Log in here