How To Improve The Output Of Feed Pellet Machine
Many users face the problems of low output, high wear, and high cost when using the feed pellet mill for the first time. No matter what the feed pellet machine equipment, we all hope that a higher output and the better. Zhengzhou Fusmar Machinery is a professional feed pellet machine manufacturer. After years of customer feedback and practical experience, summarized the following methods to improve the output of feed making machine.
Control The Content Of Crude Fiber Materials
Crude fiber is a very important factor in the pelletization process. Too much content has poor cohesiveness, it is difficult to press-form. The content is too small, which is not conducive to mold. Generally, control is best at around 5%. If you want to know the exact value, please contact us. We give the calculation result according to your specific situation.
Strict Control Of Moisture
For feed pellets, the moisture of the material must strictly control. This is the premise that the material pressed into pellets. If the moisture is too high, the pellets will loose. In fact, the biggest factor in the formation of feed pellets is water. If moisture control is good, the yield will naturally high. Secondly, the compression ratio problem, a pair of compression can save a lot of things, whether in molding or production. There are great advantages to it.
Adjust The Formula According To The Characteristics Of The Material
According to the characteristics of the material adjusted the formula and moisture. Some customers have low yield and wear in the use of the feed pellet machine due to the problem of the formula. For example, the processed grass powder content of the processed rabbit can not exceed 50%, and excessive grass powder is difficult to press and form. Secondly, the moisture content of the mixture should keep at around 20%.
The feeding method is often a problem that is easy to ignore. Many new users are feeding in a simple way, and can't feed evenly. When the feed making machine feeding unstable, the machine is vulnerable. It is best to clean up the feed pellet machine when it used. The...
Do you already have an account? Log in here