Daily operation of animal feed production line
As a user, we need installation and commissioning of the animal feed production line before the formal production. it is necessary to read the operating instructions of the equipment carefully. At the same time, it is necessary to fully understand the structure principle of the feed processing machinery, the operator should familiar with its performance and operating procedures, operate in strict accordance with the operating procedures, and conduct roving inspections in accordance with the operating procedures and precautions.
While the operating is in strict accordance with the operating procedures,the operator must keep in mind the following rules:
Normally,the feed processing machinery has been inspected and checked many times before leaves the factory,During those time, the motor has been lead-sealed and the coupling has been calibrated. Please do not loosen it. The staff needs to clean up the iron impurities on the permanent magnet cylinder and the permanent magnet plate of the feeder regularly. At the same time, it is also necessary to carefully check whether the fineness of the raw material crushed product meets the production requirements.
At the same time, please pay attention to observe the operating status of the feed pellet machine. The dust collector bag should be cleaned or replaced regularly after a period of use,which can ensure that the bag is ventilated, and the solenoid valve should be regularly checked to see if it can be normal the work. It is necessary to check the wear and tear of each vulnerable part regularly, and replace it in time if...
Do you already have an account? Log in here